Geoscience FAQ
What are tar sands?
Information preserved from American Geosciences Institute.
Tar sands (also called oil sands) are a mixture of sand, clay, water, and bitumen.[1] Bitumen is a thick, sticky, black oil that can form naturally in a variety of ways, usually when lighter oil is degraded by bacteria.[2] Bitumen has long been used in waterproofing materials for buildings, and is most familiar today as the binding agent in road asphalt. However, most of the bitumen produced from tar sands is refined and mixed with lighter oils to produce synthetic crude oil that can be further refined and used in much the same way as typical crude oil.[3]
Because bitumen is very thick and does not flow easily, it clings to the sand and clay and can’t be simply pumped out of the ground through wells like conventional oil. Instead, tar sands are mined in two main ways:[1,2]
- Open-pit mining – if tar sands are found near the surface, as in Alberta, Canada, they can be mined directly – much like open-pit coal mining – and then transferred to an extraction plant where the bitumen can be separated from the sand, clay, and water.
- In-situ mining – if tar sands are too deep to dig up, the bitumen can be extracted by injecting hot steam or solvents to loosen up the bitumen and allow it to flow through a well to the surface.
The largest deposits of tar sands in the world are found in Alberta (Canada) and Venezuela. The largest deposits in the United States are found in eastern Utah.[1,4]
Tar sands represent a potentially vast reserve of oil[2] but come with their own environmental challenges. Oil production from tar sands uses large amounts of land (for open-pit mining), water, and energy, when compared to other oil resources. Open-pit mining also produces a lot of waste (leftover sand, clays, and contaminants contained within the tar sands) that may pose a risk to nearby water supplies. Some of the existing and planned attempts to mitigate the environmental impacts of mining tar sands include using non-potable and recycled water, moving to in-situ rather than open-pit mining to decrease land use and waste, and using carbon capture and storage to reduce greenhouse gas emissions from the extraction and use of oil from tar sands.[5]
References
1 About Tar Sands U.S. Bureau of Land Management (http://ostseis.anl.gov/guide/tarsands/)
2 Heavy Oil and Natural Bitumen Resources in Geological Basins of the World U.S. Geological Survey
3 Oil Sands Pennsylvania State University Fuel Chemistry Division
4 Oil Sands/Tar Sands Utah Geological Survey
5 Oil Sands: A strategic resource for Canada, North America and the global market Natural Resources Canada
Learn More
- Oil Shale/Tar Sands Guide (Website) U.S. Bureau of Land Management (http://ostseis.anl.gov/guide/index.cfm)
Website with lots of introductory information on tar sands, including photos, maps, and links to more resources.
- Oil Shale and Tar Sands Programmatic Environmental Impact Statement (Website) U.S. Bureau of Land Management (http://ostseis.anl.gov/documents/index.cfm)
A wide range of documents relevant to the exploration for and development of tar sands on public lands, associated with the 2012 Programmatic Environmental Impact Statement from the Bureau of Land Management.
- Oil Sands (Website) Government of Alberta
Hub for information on tar sands in Alberta, Canada. Includes basic publications, maps, videos, and information on legislation, royalties, and rights.
- Mining Canada's Oil Sands (Visualization) NASA
Satellite-based visualization of the land-use impacts of development in the Athabasca oil sands (Alberta, Canada) from 1984 to 2011.
- Heavy Oil and Natural Bitumen Resources in the Geological Basins of the World (Report) U.S. Geological Survey
2007 report on the global distribution and abundance of heavy oil and natural bitumen (the oil found in tar sands).
- Oil Sands (Website) Pennsylvania State University Fuel Chemistry Division
Information on how tar sands are formed, mined, and processed.
- Oil Sands/Tar Sands (Website) Utah Geological Survey
Information on Utah's tar sand resources, the largest in the United States.
Explore Related FAQs
Do we have enough oil worldwide to meet our future needs?
U.S. Energy Information Administration
Open FAQDoes hydraulic fracturing cause earthquakes?
U.S. Geological Survey
Open FAQHow and where is waste hydraulic fracturing fluid disposed?
U.S. Geological Survey
Open FAQHow does 3D geologic mapping benefit society?
Alberta Geological Survey
Open FAQHow does recycling save energy?
American Geosciences Institute
Open FAQHow many nuclear power plants are there in the U.S.?
U.S. Energy Information Administration
Open FAQHow much carbon dioxide is produced when different fuels are burned?
U.S. Energy Information Administration
Open FAQHow much coal does the U.S. export and import?
American Geosciences Institute
Open FAQHow much electricity does a typical nuclear power plant generate?
U.S. Energy Information Administration
Open FAQHow much energy does a person use in a year?
American Geosciences Institute
Open FAQHow much natural gas does the United States have, and how long will it last?
U.S. Energy Information Administration
Open FAQHow much of the world's energy does the United States use?
U.S. Energy Information Administration
Open FAQHow much of U.S. carbon dioxide emissions are associated with electricity generation?
U.S. Energy Information Administration
Open FAQHow much of world energy consumption and electricity generation is from renewable energy?
American Geosciences Institute
Open FAQHow much oil does the U.S. export and import?
American Geosciences Institute
Open FAQHow much oil is consumed in the United States?
U.S. Energy Information Administration
Open FAQHow much U.S. electricity is generated from renewable energy?
U.S. Energy Information Administration
Open FAQHow much water does the typical hydraulically fractured well require?
U.S. Geological Survey
Open FAQWhat are the advantages and disadvantages of offshore wind farms?
American Geosciences Institute
Open FAQWhat are the different types of coal?
American Geosciences Institute
Open FAQWhat are the energy-related carbon dioxide (CO2) emissions by source and sector for the United States?
U.S. Energy Information Administration
Open FAQWhat are the major sources and users of energy in the United States?
U.S. Energy Information Administration
Open FAQWhat are underground injection wells used for?
American Geosciences Institute
Open FAQWhat environmental issues are associated with hydraulic fracturing?
U.S. Geological Survey
Open FAQWhat is an Enhanced Geothermal System?
American Geosciences Institute
Open FAQWhat is coalbed methane?
American Geosciences Institute
Open FAQWhat is frac sand?
American Geosciences Institute
Open FAQWhat is produced water?
American Geosciences Institute
Open FAQWhat is renewable natural gas?
American Geosciences Institute
Open FAQWhat is the potential for geothermal energy production in the United States?
U.S. Geological Survey
Open FAQWhat is the role of shale as a source of oil and gas resources in the United States?
U.S. Energy Information Administration
Open FAQWhat types and amounts of energy are produced in each state?
U.S. Energy Information Administration
Open FAQWhere can I find maps or information on the location of natural gas and oil pipelines?
American Geosciences Institute
Open FAQWhich states are the largest producers and consumers of coal?
U.S. Energy Information Administration
Open FAQWhich states are the largest producers and consumers of coal?
American Geosciences Institute
Open FAQWhy is geothermal energy a renewable resource? Can it be depleted?
Drew L. Siler, PhD, Geothermal Geologist
Open FAQExplore Geoscience Intersections
Browse related geoscience intersections pages connected to the topics covered in this FAQ.
Oil and Gas
Petroleum ("oil") and natural gas are hydrocarbons that formed over millions of years under heat and pressure deep in the Earth. Petroleum and natural gas are the largest sources of energy in the United States.
Learn more
Water Quality
Water quality refers to whether water is suitable for a certain purpose, like drinking or irrigation. Both natural and man-made factors can affect water quality. Contaminants can include bacteria, metals, and man-made chemicals like pesticides or pharmaceutical drugs.
Learn more